Click to Zoom

HCT2-200-21

Digital Hot Air System, 220 V
$ 715.00

Standard Lead Time:10 days

Request for Quote

The HCT2-200-21 Hot Air Pencil is a digital handheld convection tool that is ideally suited for light rework applications, which use smaller components and integrated circuits.

As component miniaturization continues (i.e. 01005 components) the ergonomics of a pencil allow a user more freedom to access and rework components on the board without affecting adjacent parts. Larger handheld convection systems commonly reflow and dislodge adjacent components due to a higher minimum airflow.

The HCT2 series of Digital Hot Air Pencils have always included an array of nozzle sizes and precision control. The HCT2-200's improved thermal performance allows the user to target a larger variety of components. Metcal has made working under a microscope easier with the optional bent nozzles. Add the HCT2-200-21 to your workbench and experience improved performance.

HCT2-200-21 was developed for very small surface mount components and package sizes (1206s and smaller) and low board densities. For denser PCBAs or applications with heavy copper planes; boards > 4 layers; or components larger than 5mm, the use of a Metcal preheater (PCT-100 series) may be necessary.
Input Voltage:240 VAC, 50 Hz
Rated Power:200 W
Source Temperature:100 - 450 °C (212 - 932 °F)
Heating Method:Convection
Airflow:1.5 - 7 l/min
Noise Level:< 52 dBA at maximum airflow
Surface Resistivity:105 - 109 Ohm
Display:Temperature & Air Flow
Size W x D x H:10.6 x 21.3 x 17 cm (4.2" x 8.4" x 6.7")
Weight:2.63 kg (5.8 lb)
Certification/Marking:CNRTLus, CE, RoHS + WEEE
Ambient Operating Temperature:10 - 40 °C (50 - 104 °F)
Power Cord Length:183 cm, 18/3 SJT
Warranty:1 Year
  • 200 Watt Ceramic Heater and Dual-Stage Air Pump: Provides the power and performance needed to deliver the right amount of thermal energy.
  • Digital Airflow & Temperature Controls: Two LED displays provide a graphical and numerical representation of the desired airflow and temperature.
  • Fast Response and Performance: A microprocessor controlled, closed-loop feedback system provides fast heating, precise and stable temperature control.
  • Standby Mode: When the handpiece is placed into the workstand, the temperature will drop, prolonging heater life.
  • Replaceable Handpiece: The handpiece has been redesigned to allow removal from the front of the unit.
  • Ergonomic and Light Weight Handpiece: Slim and ergonomic design hand-piece that feels like a pencil, with a rubber grip.
  • Easily Change Heaters, Nozzles, and Handpieces: All can be changed in moments.
  • Nozzles: Six nozzles (1.5 mm – 4.0 mm) are included with the unit, with a nozzle plate holder inside the workstand.
  • Base Unit
  • Handpiece
  • Workstand w/ Nozzle Holder
  • Heater Assembly
  • Pack of 6 Straight Nozzles
  • Nozzle Removal Pad

Recently Viewed