Click to Zoom

MX-500DS

MX-500 Desoldering Rework System
$ 1,095.00

Standard Lead Time:10 days

Request for Quote

The system utilizes SmartHeat® Technology, where each cartridge is equipped with a self-regulating heater that ‘senses’ its own temperature and closely maintains its preset idle temperature for the life of the heater tip. The tip temperature is determined by the inherent metallurgical properties of the heater; no external adjustment or equipment is required. The MX-500 retains a switchable dual port and 40W SmartHeat® Power
Input Line Voltage:100 - 240 VAC, grounded circuit, 50/60 Hz
Rated Power Consumption:70 W max.
Output Power:Variable, 40 W max.*
Output Frequency:13.56 MHz
Heating Method:Induction, SmartHeat®
Connections:Dual Port, switchable
Power Supply Dim. W x D x H:121 x 121 x 220 mm (4.8" x 4.8" x 8.7")
Power Supply Weight:2.65 kg (5.8 lb)
Certification / Marking:cTUVus, CE
Tip-to- Ground Potential:< 2 mV
Tip-to-Ground Resistance:< 2 Ohm
Ground Detection:Permanent
Surface Resistivity:105 - 109 Ohm
Idle Temperature Stability:1.1 °C ( 2 °F) in still air
Tip Temperature Accuracy:Meets or exceeds IPC J-STD-001 Standard
Power Cord Length:183 cm, 18/3 SJT
Warranty:4 years
Ambient Operating Temp:10 - 40 °C (50 - 104 °F)
Max. Enclosure Temp:55 °C (131 °F)
  
Solder-Pen SpecificationSolder-Pen
Hand-Piece Cable Length:183 cm (72”), burn proof, ESD-safe
Hand-Piece - RF Connector:F-type power connector
Desolder-Pen Specificaton:MX-DS1
Hand-Piece Cable Length:183 cm (72”), burn proof, ESD-safe
Hand-Piece - RF Connector:F-type power connector
Air Hose:ESD-save
Tweezer Specification:MX-PTZ
Hand-Piece Cable Length:183 cm (72”), burn proof, ESD-safe
Hand-Piece - RF Connector:F-type power connector
Desolder Workstand:MX-W5DS
  • A built-in Net Power Meter displays a graphical and numerical representation of the power applied to the cartridge.
  • User Programmable Power Save Mode - adjustable from 10 to 120 minutes.
  • Ground Fault Interrupt: AC ground monitor detects power line ground failures and immediately alerts the operator and shuts down the system.
  • Universal Power Supply: automatically senses the input line voltage and adjusts accordingly, which allows for worldwide operation without adaptors or a change in performance.
  • Full compatibility with existing and previous MX upgrade kits, tip-cartridges, hand-pieces and accessories.
  • MX-PS500 Power Supply
  • MX-DS1 Desolder Hand-Piece for MX Systems
  • MX-DAH4 ESD Air Hose for Desoldering Hand-Piece
  • MX-RM8E Desoldering
  • Hand-Piece Cord for MX-DS1
  • MX-W5DS Tip Saver Work-stand for Desolder Hand-Piece
  • MX-CP1 Cartridge Removal Pad
  • AC-TC Desolder Tip Cleaner
  • MX-DCF1 Chamber Liners (Pack of 15)
  • Filters (Pack of 6)
Cartridges and Tips compatible with This Product

Recently Viewed