Click to Zoom

MX-5210

80W MX System w/ MX-PS5200, 1 Adv Hand-Piece, 1 Workstand
$ 799.00

Standard Lead Time:10 days

Add to Quote Request

The MX-5200 soldering, desoldering and rework series has increased power and process control, with dual-simultaneous ports.

For two users or single user with dual applications. The MX-5200 can be operated with two handpieces dynamically sharing the 80 watts output power based on demand adding even more application flexibility and speed.

Fast time-to-recovery.
Delivers increased production rates and throughput no matter the application. The challenges of high mass components, multilayered boards and lead-free solders are seamlessly tackled by the MX-5200 super-charged power supply.

SmartHeat® process control.

The technology built-in every Metcal System means that soldering and rework are always performed at safe, controlled temperatures. Metcal users know that moderate fixed temperatures, where power is varied, provides the best assurance for a well-controlled soldering and rework process.
Input Line Voltage: 100 - 240 VAC, grounded circuit, 50/60 Hz
Rated Power Consumption: 70 W max.
Output Power: Variable, 40 W max.*
Output Frequency: 13.56 MHz
Heating Method: Induction, smartHeatR
Connections: Dual Port, switchable
Power Supply Dim. W x D x H: 121 x 121 x 220 mm (4.8" x 4.8" x 8.7")
Power Supply Weight: 2.65 kg (5.8 lb)
Certification / Marking: cTUVus, CE
Tip-to- Ground Potential: < 2 mV
Tip-to-Ground Resistance: < 2 Ohm
Ground Detection: Permanent
Surface Resistivity: 105 - 109 Ohm
Idle Temperature Stability: 1.1 °C ( 2 °F) in still air
Tip Temperature Accuracy: Meets or exceeds IPC J-STD-001 Standard
Power Cord Length: 183 cm, 18/3 SJT
Warranty: 4 years
Ambient Operating Temp: 10 - 40 °C (50 - 104 °F)
Max. Enclosure Temp: 55 °C (131 °F)
   
Solder-Pen Specification Solder-Pen
Hand-Piece Cable Length: 183 cm (72”), burn proof, ESD-safe
Hand-Piece - RF Connector: F-type power connector
Desolder-Pen Specificaton: MX-DS1
Hand-Piece Cable Length: 183 cm (72”), burn proof, ESD-safe
Hand-Piece - RF Connector: F-type power connector
Air Hose: ESD-save
Tweezer Specification: MX-PTZ
Hand-Piece Cable Length: 183 cm (72”), burn proof, ESD-safe
Hand-Piece - RF Connector: F-type power connector
Desolder Workstand: MX-W5DS
  • A built in Net Power Meter which will display a graphical and numerical representation of the power applied to the cartridge.
  • User Programmable PowerSave Mode: the time to enter PowerSave Mode is adjustable from 10 to 120 minutes.
  • Ground Fault Interrupt: AC ground monitor detects power line ground failures and immediately alerts the operator and shuts down the system.
  • Universal Power Supply: automatically senses the input line voltage and adjusts accordingly, which allows for worldwide operation without adaptors or a change in performance.
  • Full compatibility with existing and previous MX upgrade kits, tip-cartridges, hand-pieces and accessories.
    MX-PS5200 Power Supply MX-H1-AV Advanced Hand-Piece for MX Systems MX-W1AV Tip Saver Work-stand for Advanced Hand-Piece MX-CP1 Cartridge Removal Pad
Cartridges and Tips compatible with This Product

Recently Viewed