Click to Zoom

MX-570

40W MX System w/ MX-PS500, USF-1000
$ 1,258.00

Standard Lead Time:10 days

Request for Quote

The system utilizes SmartHeat® Technology, where each cartridge is equipped with a self-regulating heater which ‘senses’ its own temperature and closely maintains its preset idle temperature for the life of the heater-tip. The tip temperature is determined by the inherent metallurgical properties of the heater; no external adjustment or equipment is required. The MX-500 retains switchable dual port and 40W SmartHeat® -Power
Input Line Voltage: 100 - 240 VAC, grounded circuit, 50/60 Hz
Rated Power Consumption: 70 W max.
Output Power: Variable, 40 W max.*
Output Frequency: 13.56 MHz
Heating Method: Induction, smartHeatR
Connections: Dual Port, switchable
Power Supply Dim. W x D x H: 121 x 121 x 220 mm (4.8" x 4.8" x 8.7")
Power Supply Weight: 2.65 kg (5.8 lb)
Certification / Marking: cTUVus, CE
Tip-to- Ground Potential: < 2 mV
Tip-to-Ground Resistance: < 2 Ohm
Ground Detection: Permanent
Surface Resistivity: 105 - 109 Ohm
Idle Temperature Stability: 1.1 °C ( 2 °F) in still air
Tip Temperature Accuracy: Meets or exceeds IPC J-STD-001 Standard
Power Cord Length: 183 cm, 18/3 SJT
Warranty: 4 years
Ambient Operating Temp: 10 - 40 °C (50 - 104 °F)
Max. Enclosure Temp: 55 °C (131 °F)
   
Solder-Pen Specification Solder-Pen
Hand-Piece Cable Length: 183 cm (72”), burn proof, ESD-safe
Hand-Piece - RF Connector: F-type power connector
Desolder-Pen Specificaton: MX-DS1
Hand-Piece Cable Length: 183 cm (72”), burn proof, ESD-safe
Hand-Piece - RF Connector: F-type power connector
Air Hose: ESD-save
Tweezer Specification: MX-PTZ
Hand-Piece Cable Length: 183 cm (72”), burn proof, ESD-safe
Hand-Piece - RF Connector: F-type power connector
Desolder Workstand: MX-W5DS
  • A built in Net Power Meter which will display a graphical and numerical representation of the power applied to the cartridge.
  • User Programmable PowerSave Mode: the time to enter PowerSave Mode is adjustable from 10 to 120 minutes.
  • Ground Fault Interrupt: AC ground monitor detects power line ground failures and immediately alerts the operator and shuts down the system.
  • Universal Power Supply: automatically senses the input line voltage and adjusts accordingly, which allows for worldwide operation without adaptors or a change in performance.
  • Full compatibility with existing and previous MX upgrade kits, tip-cartridges, hand-pieces and accessories.
  • MX-PS500 Power Supply
  • USF-1000 Solder feeder
  • MX-H7-SF Solder feeder Hand-Piece
  • USF-FTA-12 Feeder Tube Assembly
  • USF-GTA-12 Teflon Nozzle
  • AC-FS1 Footswitch and WS1Sleeper Stand
  • MX-CP1 Cartridge Removal Pad
Cartridges and Tips compatible with This Product

Recently Viewed